BPTPL - F41-4102-710, CARTRIDGE A-30 (BLACK)

  • MSDS: BPTPL
  • Manufacturer: CANON USA INC
  • Product Name: F41-4102-710, CARTRIDGE A-30 (BLACK)
  • National Stock Number: 6850-00N034021
Product Identification

Product ID:F41-4102-710, CARTRIDGE A-30 (BLACK)
MSDS Date:12/01/1991
FSC:6850
NIIN:00N034021
MSDS Number: BPTPL

Responsible Party
CANON USA INC
ONE CANON PLAZA
LAKE SUCCESS, NY 11042
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 516-488-6700

Cage: 1BA63

Contractor
CANON USA INC
LAKE SUCCESS, NY 11042 US

Telephone: 516-328-5600

Cage: 1BA63

Ingredients

STYRENE ACRYL COPOLYMER

Fraction By Weight: 55-60%


IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 30-40%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER IS NOT ACCESSIBLE, UNLESS THE
CARTRIDGE IS FORCED OPEN, OR BROKEN INTO. INHAL:TONER IS A FINELY
DIVIDED SOLID. DO NOT BREATHE DUST. EYE:NO SPECIFIC HAZARD IS KNOWN
TO CANON. HOWEVER, ANY MATERIA L THAT CONTACTS THE EYE MAY BE
IRRITATING. SKIN:LOW HAZARD FOR INDUSTRIAL HANDLING. EFTS OF
OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MFR EXPOS LIMITS:PEL:15 MG/M3 TDUST, 5
RDUST. TLV:10 MG/M3 TDUST.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:REMOVE FROM EXPOSURE TO FRESH AIR. EYE:OPEN EYE AND
FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. IF IRRITATION
PERSISTS GET MEDICAL ATTENTION. SKIN:WASH WITH SOAP AND WATER.
INGEST:DRINK SEVERAL GLASSES OF WATER. CALL A PHYSICIAN.

Fire Fighting

Flash Point:NON-FLAMM SOLID
Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATERIAL, LIKE MOST ORGANIC
MATERIALS IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.

Accidental Release

Spill Release Procedures:SWEEP MATERIAL ONTO PAPER AND PLACE IN FIBER
CARTON.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN.
Other Precautions:KEEP FROM CONTACT WITH OXIDIZING MATERIALS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4 (H*2O = 1)
Evaporation Rate & Reference:NEGLIGIBLE (BU AC = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE POWDER WITH A SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume:NEG

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATERIAL,
DECOMPOSITION WILL PRODUCE CO AND CO*2.

Disposal

Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE REQUIRED. ENSURE
COMPLIANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.